OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
-
- Posts: 4
- Joined: Thu Apr 16, 2015 9:13 am
- Location: Brisbane
-
- Old Hand
- Posts: 9194
- Joined: Tue Jan 10, 2006 8:31 pm
- Location: Warragul,Vic.
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
....nice...did you get it?
-------------
Col....
"Works" comes before "looks good", cos "looks good" changes, and "works" works!
Col....
"Works" comes before "looks good", cos "looks good" changes, and "works" works!
-
- Posts: 4
- Joined: Thu Apr 16, 2015 9:13 am
- Location: Brisbane
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
No, I didn't. I don't have anywhere to put it at the moment, plus its a 10 hour round trip.
The farmer was not particularly happy with us being on his land, and we were told to steer well clear of the homestead and out buildings, and to make no contact with him at all.
Don't imagine it going anywhere any time soon though.
The farmer was not particularly happy with us being on his land, and we were told to steer well clear of the homestead and out buildings, and to make no contact with him at all.
Don't imagine it going anywhere any time soon though.
- 34 pickup
- Member
- Posts: 858
- Joined: Tue Jan 20, 2004 11:50 pm
- Location: perth australia
- Brootal
- Old Hand
- Posts: 2883
- Joined: Tue Jun 11, 2002 7:04 pm
- Location: Trigg, Western Australia
- Contact:
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
It's OK, I'm not really from Sydney, I just moved there, but now I'm back in Perth so I'm normal again.
[url=http://www.the-rumbler.com]Ramblers, Hot Rods, Surfing and Model Cars[/url]
[url=http://www.the-rumbler.com]Ramblers, Hot Rods, Surfing and Model Cars[/url]
-
- Posts: 406
- Joined: Tue Apr 14, 2009 5:25 pm
- Location: North Rothbury/ NSW
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Is anyone interested in this. in the Hunter Valley NSW
The guy is going to scrap it if not gone soon. I don't have anywhere to store it. He's had a lot of people say they are going to come and get it and they never do. He will want a small amount of cash for it.
Be nice to see someone grab it instead of it going through our shredder.
He also has a chassis from the same model without anything else.
The guy is going to scrap it if not gone soon. I don't have anywhere to store it. He's had a lot of people say they are going to come and get it and they never do. He will want a small amount of cash for it.
Be nice to see someone grab it instead of it going through our shredder.
He also has a chassis from the same model without anything else.
Last edited by Ford pickup 50 on Thu May 26, 2016 1:02 pm, edited 1 time in total.
Regards Paul
-
- Senior Member
- Posts: 1216
- Joined: Tue Dec 27, 2005 5:40 pm
- Location: Lilydale, Vic
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Helps to know where its at?
-
- Posts: 406
- Joined: Tue Apr 14, 2009 5:25 pm
- Location: North Rothbury/ NSW
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Hunter valley NSW (under my photo but cheers)chop_shop wrote:Helps to know where its at?
Regards Paul
- Gojeep
- Old Hand
- Posts: 7224
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Is it a 1925 Dodge?Ford pickup 50 wrote:Is anyone interested in this. in the Hunter Valley NSW
The guy is going to scrap it if not gone soon. I don't have anywhere to store it. He's had a lot of people say they are going to come and get it and they never do. He will want a small amount of cash for it.
Be nice to see someone grab it instead of it going through our shredder.
He also has a chassis from the same model without anything else.
Last picture show 3/4 elliptical springs. Don't see those too often.
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
-
- Posts: 406
- Joined: Tue Apr 14, 2009 5:25 pm
- Location: North Rothbury/ NSW
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
That's my guess to marcus. Nothing on it any where (without burning the grass around it) that has any branding.
Cheers
(Sent from a stupid hi tech device that can make phone calls SOMETIMES!)
Cheers
(Sent from a stupid hi tech device that can make phone calls SOMETIMES!)
Regards Paul
-
- Senior Member
- Posts: 1180
- Joined: Thu Jun 21, 2012 8:25 am
- Location: Qld.
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
The front looks Dodge, but I think it's earlier than 25, may be around early 20,s. What I can remember of 25 dodges is the chassis extended out the rear to a normal Spring shackle. Not the 3/4 Spring set up. I,Ve seen the 3/4 springs before, but can,t remember on what car.
Cheers GT
Cheers GT
- woody28A
- Old Hand
- Posts: 3501
- Joined: Tue Sep 05, 2006 9:52 pm
- Location: "About forty-five minutes southeast of Thibodeaux, Louisiana" or "Hobbitsville"
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
A lot of veteran vehicles ( up to 1919) and some 'carryovers' ran 3/4 eliptics. I reckon that Dodge is maybe '16 -'22.
Remember this life is a test. If it had been a real life you would have received further instructions on where to go and what to do!!!!!
- snooze
- Member
- Posts: 514
- Joined: Wed Nov 06, 2002 5:33 pm
- Location: Shoalhaven Heads NSW
- Contact:
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
If somebody doesn't get it soon it won't matter what it is , it will be scrap metal !!!!!!!!!!
Snooze
Snooze
http://aussierodding.altervista.org/INDEX.html
http://headlampsbybill.150m.com/
http://hotrodindex.atwebpages.com/
http://ozcoetrucks.netau.net/Index.a.html
http://willysbill.imgur.com
http://headlampsbybill.150m.com/
http://hotrodindex.atwebpages.com/
http://ozcoetrucks.netau.net/Index.a.html
http://willysbill.imgur.com
-
- Senior Member
- Posts: 1042
- Joined: Fri Jan 25, 2008 2:11 pm
- Location: Forest Lake QLD
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Don't just talk about it Snooze, you must be due for another tin hunt by now!
-
- Posts: 406
- Joined: Tue Apr 14, 2009 5:25 pm
- Location: North Rothbury/ NSW
Re: OLD TIN Section – Post it here! *NEW - TIN HUNT PICS*
Believe me I know. I am a yard manager for sims metal and $70 a ton is all its worth as scrap at the moment. I can't store it and the owner needs it gone. He had heaps of people look at it and they were all going to come and get it. Just be a shame to see it gone forever. I've saved a few vehicles now and I'm pretty happy about that. This ones not that bad a project.snooze wrote:If somebody doesn't get it soon it won't matter what it is , it will be scrap metal !!!!!!!!!!
Snooze
On another note he has a Vauxhall there also that I will look at tomorrow and snap some pics of.
Regards Paul