"Boss" - EH Ute Build
-
FRANK BASILE
- Old Hand
- Posts: 13896
- Joined: Wed May 07, 2003 3:14 pm
Re: "Boss" - EH Ute Build
Good score for $50. A re skin with decent treatment and they should be good for many decades to come. Are you doing new replacements or refurbs, aside to the crusty parts , the main appears to be solid.
OZ-E-Rodders Rod and Kustom Club Member #31
-
Gojeep
- Old Hand
- Posts: 7219
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: "Boss" - EH Ute Build
A good move for sure. 
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
-
Sly Fox
- Senior Member
- Posts: 1923
- Joined: Sat Apr 24, 2010 7:10 pm
- Location: Castle Hill, NSW
Re: "Boss" - EH Ute Build
Hi Frank, the inside will get blasted and primed and definitely new door skins primed on the inside as well so I never have to worry about them again.FRANK BASILE wrote: ↑Wed Mar 06, 2024 6:41 am Good score for $50. A re skin with decent treatment and they should be good for many decades to come. Are you doing new replacements or refurbs, aside to the crusty parts , the main appears to be solid.
51 Dodge Custom & 63 EH Ute - Dare to be different