Yank questions

enjenjo · Post by **enjenjo** » Mon Jan 13, 2003 1:59 pm

Can you fellas answer a couple questions for me?

1 does a Holden V8 use the same bell housing as a SBC?

2 are there any SBC bellhousings with a right side clutch fork in Oz?

TIA

pop · Post by **pop** » Mon Jan 13, 2003 10:41 pm

hi ya yes the holden 308 v8 comes in turbo bolt patten as for the right hand clutch fork the early holden 1967/8 monaro used 307/ 327/350
chev motors that ran 4speed muncie gearbox

enjenjo · Post by **enjenjo** » Tue Jan 14, 2003 1:00 am

I suspected as much, some adapters are listed for both SBC, and Holden. Thanks for the info on the Monaro.

Fingers · Post by **Fingers** » Thu Jan 16, 2003 11:48 am

check which 308 you have, some have the chev pattern, but not all!
if its a 253 V8 it will have the Holden pattern for sure.

enjenjo · Post by **enjenjo** » Thu Jan 16, 2003 12:11 pm

I don't have a Holden, I am trying to cobble a right hand clutch setup on a SBC in the USA. I found tha CRS has what I need, thanks for the replys.