39Chev panel van
-
- Posts: 195
- Joined: Sun Feb 19, 2012 9:01 am
39Chev panel van
G,day everyone happy new year. Its about time I got around to starting a post. I have just started on our van that has been waiting since the mid eighties. you know how life gets in the way had to do a couple of rebuilds on the pilot in the meantime. plus a couple of other cars.
anyway to the point the plan is jag front and rear ls1 and trans out of a sv8 and as much of the commodore as possible. here's a couple of picks of when we picked it up way back thats a start more next year.
anyway to the point the plan is jag front and rear ls1 and trans out of a sv8 and as much of the commodore as possible. here's a couple of picks of when we picked it up way back thats a start more next year.
- rx4ord
- Old Hand
- Posts: 6853
- Joined: Tue Jan 11, 2005 8:08 pm
- Location: Tasmania! Tasmania!
Re: 39Chev panel van
Sounds like a great project.
Looking forward to the progress pics.
Tassie Dave
Looking forward to the progress pics.
Tassie Dave
Founding Member of OZ-E-Rodders
- Mopar Mick
- Old Hand
- Posts: 7364
- Joined: Tue Jun 10, 2003 7:13 pm
- Location: Beyond the Black Stump.
Re: 39Chev panel van
Happy new year to you Pilot 48.
Sounds like an interesting project.
Nice Pilot as well.
Mick.
Sounds like an interesting project.
Nice Pilot as well.
Mick.
Old age and treachery will always overcome youth and skill.
- Chrisso
- Old Hand
- Posts: 4178
- Joined: Thu Apr 12, 2012 10:44 am
- Location: Albury NSW
Re: 39Chev panel van
Great looking van Charlie, should be a good build. How's that Pilot going??
- toprodz
- Old Hand
- Posts: 2604
- Joined: Sun Mar 23, 2003 10:44 am
- Location: Wallan Victoria 0412 81 1932
Re: 39Chev panel van
Happy New Year, That looks like a pretty rare van, Is it an Aussie built body?? I like your choice of running gear, I am Looking forward to updates as you go, as I am a little partial to a Panel Van..
Regards
Peter Gough
FOUNDING MEMBER #24 OZ-E-RODDERS ROD & KUSTOM CLUB
Peter Gough
FOUNDING MEMBER #24 OZ-E-RODDERS ROD & KUSTOM CLUB
-
- Posts: 195
- Joined: Sun Feb 19, 2012 9:01 am
- Newbee
- Member
- Posts: 576
- Joined: Mon May 26, 2014 10:59 pm
- Location: YP of SA
Re: 39Chev panel van
Nice looking Van there pilot48 looking forward to your progress.
Newbee
Newbee
-
- Posts: 195
- Joined: Sun Feb 19, 2012 9:01 am
Re: 39Chev panel van
Bit more progress rear end almost mounted just got to cut the mounts for the trailing arms out of the jag turned up some crush tubes on the lathe and tacked it together
[url=https://postimg.org/image/9m3dyxmfz/][/url]
The wife has been busy removing the old paint with a razor blade she wants to help were she can and gets to hold the end of the tape as well most helpful.
[url=https://postimg.org/image/9m3dyxmfz/][/url]
The wife has been busy removing the old paint with a razor blade she wants to help were she can and gets to hold the end of the tape as well most helpful.
- Mopar Mick
- Old Hand
- Posts: 7364
- Joined: Tue Jun 10, 2003 7:13 pm
- Location: Beyond the Black Stump.
Re: 39Chev panel van
All progress is good.
Keep up the good work.
Mick.
Keep up the good work.
Mick.
Old age and treachery will always overcome youth and skill.
- Mopar Mick
- Old Hand
- Posts: 7364
- Joined: Tue Jun 10, 2003 7:13 pm
- Location: Beyond the Black Stump.
Re: 39Chev panel van
Post deleted as it was doubled up.
Mick.
Mick.
Old age and treachery will always overcome youth and skill.
- FRANK BASILE
- Old Hand
- Posts: 13896
- Joined: Wed May 07, 2003 3:14 pm
Re: 39Chev panel van
The floor mounts or "hats" for the rear end trailing arms were and should still be available new . They are a rust repair item .
OZ-E-Rodders Rod and Kustom Club Member #31
- hewey
- Old Hand
- Posts: 4928
- Joined: Fri Mar 10, 2006 12:11 am
- Location: Penrith, Sydney
- Gojeep
- Old Hand
- Posts: 7220
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: 39Chev panel van
Great to see another Panel build.
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
- Chrisso
- Old Hand
- Posts: 4178
- Joined: Thu Apr 12, 2012 10:44 am
- Location: Albury NSW
Re: 39Chev panel van
Nice Charlie Nice.........
-
- Posts: 7
- Joined: Sat Dec 22, 2012 11:31 pm
Re: 39Chev panel van
Wow, I have the same 39 turrant top panelvan at home, yours is the only other I have seen.
Holdens used the 38 style body's for most of 39 and at the end of 39 they started producing the turrent top body with the larger metal presses.
Can't wait to see yours on the road.
Holdens used the 38 style body's for most of 39 and at the end of 39 they started producing the turrent top body with the larger metal presses.
Can't wait to see yours on the road.